Welcome to visit the HongGang website!
Change language:
Stranding Machine
Date:2016/3/25 17:31:30 Visits: Author:Deyang Hongguang Machine Equipments Co.,Ltd


It is composed of pay-off stand,headstock,stranding rotor,cradle,supporting roller,wire die holder,brake,bearing stand,haul-off capstan device and take-up & traversing stand.


It is mainly used for manufacturing copper strand, aluminium strand, ACSR and normal steel wire or rope. The rotor is supported by bearing. A clip brake is adopted for braking. The protection covers completely closed down. This machine is characteristic for its high speed, low noise and sensitive braking.

JLG-630 the rotor speed is very high,by adopting an iron casting base,the vibaation is thus reduced to lower noise;with a wide production range,it can strand s number of material as aluminum calded with steel,aluminium,steel and copper with its pitch reaching 40.07mm.

The take-up& traversing stand is easy for operation and traversing is relatively equal.It is convenient to load and unload bobbins at high speed.The machine is easily maintained without high cost.;

Technical data

                 single wire dia.(mm)                      standing dia.      delivery speed      rotor speed

                        Cu                Al                 Steel                 (mm)                  (m/min)               (r/min)

JG-630/12        Φ2.0-3.5       Φ1.5-4.5      Φ2.5-4.5           Φ35                 8.6-144.8               300


Contact: Phone:Mr Feng 13881045888,Mr Kong 18981050262
Tel: +86-838-2916152,+86-838-2901066
Fax:+86 838 2901066
Address:No. 23, Taihu road, Deyang, Sichuan, China
CopyRight@Deyang Hongguang Machine Equipments Co.,Ltd